Monthly Archives: January 2012
Outlaw 356
This project has been on hold for awhile as we were waiting for the shop that did the body work to come by and go over some unresolved issues on the car. After a month of no shows, we have … Continue reading
996 C4S Headlight Repair
Wes had this 996 come into the shop this weekend while we were at Daytona. The headlights weren’t working anymore, which is usually due to the headlight switch, which he was able to replace and fix the issue. Then it … Continue reading
951 Track Build Continued
Last week we continued on with our 951 track project. We started bending and welding the rear roll bar into place which burned up most of the day. Bending the main hoop. And cutting to length. What we came out … Continue reading
Mustang Strut Rod Bushings and Mule Repair
We are currently tackling suspension on the Mustang. Once we sorted all the running issues we were able to drive it at speed. And then quickly back to the shop to replace the worn suspension. The car was all over … Continue reading
50th Running of 24hr Rolex Race
Saturday morning myself and good buddies Mark and Jim woke up early to get on a plane and head to Orlando for the 50th 24hr Rolex race at Daytona International Speedway. There we met up with Al, Chris, and Bob … Continue reading
1965 Mustang wheel bearings
So now that all of the other issues have been sorted it is time for the little details. We had decided to go all through the front end just because mid 60s handling isn’t ideal at best, and 45 years … Continue reading
Odds and Ends
Today I started gutting this 1987 951 to start it’s transformation into a track car. We aren’t going to go full boat crazy with this in regards to gutting it, because this track car will still drive to the events … Continue reading
530i 60k Service
Had this 530i come in for it’s 60k service today. Being an 04, it was time to get the fluids flushed and the filters changed. Step 1: Drain the oil. Step 2: Make big oil mess. Step 3: Drain the … Continue reading
Miata head done
If you have been following this build we showed the sorry state this head was in before. Now decked with new seals and all of the valves seated the head is ready to go back together. Cam seals in the … Continue reading
Infinity FX45
Daily driver business This little FX45 came in for some needed maintenance to get it through the year. The brakes were pulsating, it was low on oil, and it needed a seat heater switch repair. All easy stuff….or so I … Continue reading
