22Sep2010
996 Cab Repair
A few posts ago I had talked about a convertible top problem on a 996. There were 2 issues, the first being the latch mechanism that kept running in circles, and then the passenger side flap was slightly out of time with everything else, cause it to hang up slightly when the top was opened. I finally got the latch trim piece in so repair was underway. The new piece. The tip has to operate the microswitch, if it is …
20Sep2010
Project GT3RS GMG Exhaust
Finally got around to installing the GMG headers and center muffler section on the GT3RS. Overall differences in weights were minimal. The OE headers/cats were sighly lighter than the GMG headers and the GMG center section was lighter than the OE center section slightly. The sound at idle is slightly louder, but very civil. The sound at 4500rpms when the valves open on the stock mufflers, is incredible! Getting started: We also have a set of quad laser intercepters to …
GMG exhaust arrived today for the RS, so next week we should start the install on that. Also swapped over the traqmate into the RS from the 997TT. Went with a little more direct install route this time for simplicity of wiring. Basic setup is the same, though I mounted the camera to the rollbar this time to see how that works.
02Sep2010
GT3RS Project
Been so busy lately we haven’t had time to play with the RS at all. Tonight it ended up in the garage for some minor upgrades. We installed new Porsche pedals, Traqmate, and changed the oil. Next week hopefully the GMG exhaust will be here and we can installthe laser intercepters and hardwire the V1. GMG wheels are on it, and the black sticker package will be done soon. First was to change out the center consol lid to an …
18Aug2010
993C4S Farewell……
Well looks like a good freind of mine is shipping off his 993C4S to it’s new home. Sad to see a car leave the area, but on to bigger things. A few items ended up not in the deal, so while he is out of town, I will swap out a few things and get the car ready to ship out……hey wait a second….i see what is happening here…… Up on stands. Old wheels are coming off and the stock …
14Aug2010
RSR rollbar install and harnesses
We tackled the rollbar yesterday in the RS. It was hot, damn hot, even in the garage. Got it knocked out by about 7 or so. Spent more money mid install when we decided the car needed a new exhaust……. There is nothing more fun than taking a brand new $150k car with 600 miles on it and disassembling it….. Massaging the carpet out of the side panels to modify the plastic housings under the carpet. Fitting the bar. Did …
11Aug2010
996 C4S Brakes and V1 Install
Slapped new brake pads in for a buddy and helped him with his V1 hardwire install. There are a couple of ways to do the V1’s in the 996, I usually like to pull power from a plug in the center console. On a non-auto dimming mirror car, you can hide everything up in the sunroof control/light area, but with the dimming mirror, space is a little tighter. Brake pad replacement. Starting the V1 install. Running the wire up over …
10Aug2010
Project 997TT For Sale SOLD
With the addition of the GT3RS, Jack has decided to sell his 997TT project to move forward with the GT3RS project. The build has been covered 100% on this blog over the last year. 2007 911 Twin Turbo Miles: 13,000 Price: 130k Location: Kansas City Contact: dockarl (at) wilen.us Car will include open car steel tilt trailer, 2 sets of wheels (CCW’s with hoosiers, and Champions with PS2’s), and the stock parts. The build: GMG adjustable sway bars front and …
08Aug2010
New project car
Got a call last Friday from good friend to come up with him to test drive and take delivery of a new 2011 GT3RS from the local dealer. Spent some time with the car on the road, and it is absolutely amazing. Now time for some mods! We will get a GMG RSR Rollbar ordered asap along with a set of harnesses. Also will be doing a Laser Intercepter Quad install along with a Valentine 1. It doesn’t get any …