29Mar2012
2003 Boxster IMS Upgrade
Have this 2003 boxster in the shop right now for an IMS bearing upgrade. Another 19k mile car with a pretty bad oil leak underneath the car. The later cars can be a real bear to pull the transmission on. This car has the glass rear window, which severely limits access to the top of the engine bay (even for me), and it is a tiptronic, which means disconnecting the torque converter to the flex plate has to be done …
Got the new parts in for the little white Boxster today so I went about installing the new cables and transmissions. The updated kit. The early Boxsters used weak transmissions for the top mechanism, which Porsche later updated to beefier units. The old units are no longer available, so updating is the way to go rather than buying a used unit that will fail eventually. Old transmission to come out. New transmission installed. Then there is a lot of measuring …
07Jan2012
Porsche 996 IMS Bearing Update Part I:
Brought this 996 in this week to start an intermediate shaft bearing upgrade as preventative maintenance. I wrote an article for the KCRPCA newsletter this past month, so here is the actual procedure in a little more depth. Up in the air ready to rock. Awolnation provided the beats, and I started tearing out the parts. A lot of stuff needs to be removed including the lower suspension carriers, transaxle, and clutch assembly. The side skirts have taken a little …
16Aug2011
996 Engine Time
This happy camper was dropped off this afternoon for a little internal work. Many are likely aware of the Intermediate Shaft Bearing issues in the 986 and 996. This car has about 60k miles and is a 1999, so that little mileage spells disaster for the bearing typically. It has a lot of oil weeping here and there that I will take care of once I crack it open. The plan is to replace the standard maintenance items while it …